SinuRinse is a natural soothing saline nasal wash. A large volume low positive pressure nasal wash is the most effective way to irrigate the nose based on current medical studies. Nasal Irrigation is an excellent way to clean mucus from the nose making medication more effective. They also clean allergens, irritants, bacteria and viruses from the nose reducing the frequency of infection. Furthermore, they help decrease swelling in the nose and increase air flow. SinuRinse is excellent for all ages.

Relieves Allergy & Sinus Syptoms such as:

Nasal Allergies & Dryness

Sinus pressure & nasal stuffiness

Nasal Symptoms from flu and cold

Nasal Irritation from occupational dust, fumes, animal dander, grass, pollen, smoke & house dust

Post nasal drip & nasal congestion

Sinus Rinse Nasal Rinse Kit comes with 10 satchets of easy to dispense USP Grade, Preservative Free, Sodium Chloride and Sodium Bicarbonate mixture (Ph balanced & Isotonic for maximum comfort) . Easy-squeeze bottle comes with volume marker. Each satchet contains a precisely measured amount to mix with 8oz. (240ml) of lukewarm distilled water, taking the guesswork out of prepairing this soloution. The kit also contains step by step directions for use and extensive educational material that is simple to understand.

Soothing, no burning, no stinging, large volume & low pressure irrigation.

Suitable For :

Information Currently Unavailable

How to Use :

Step 1

Please wash your hands. Fill the clean bottle with the designated volume of warm distilled water, filtered water or previously boiled water. You may warm the water in a microwave but we recommend that you warm it in increments of five seconds. This is to avoid excessive heating of the water and damage to the device or scalding your nasal passage.

Step 2

Cut the SINUS RINSE mixture packet at the corner and pour its contents into the bottle. Tighten the cap & tube on the bottle securely, place one finger over the tip of the cap and shake the bottle gently to dissolve the mixture.

Step 3

Standing in front of a sink, bend forward to your comfort level and tilt your head down. Keeping your mouth open without holding your breath, place cap snugly against your nasal passage and SQUEEZE BOTTLE GENTLY until the solution starts draining from the OPPOSITE nasal passage or from your mouth. Keep squeezing the bottle GENTLY until at least 1/4 to 1/2 (60 to 120 mL) of the bottle is used for a proper rinse. Do not swallow the solution.

Step 4

Blow your nose gently, without pinching your nose completely because this will apply pressure on the eardrums. If tolerable, sniff in any residual solution remaining in the nasal passage once or twice prior to blowing your nose as this may clean out the posterior nasopharyngeal area (the area at the back of your nasal passage). Some solution will reach the back of the throat, so please spit it out. To help improve drainage of any residual solution, blow your nose gently while tilting your head to the opposite side of the nasal passage that you just rinsed.

Step 5

Now repeat steps 3 & 4 for your other nasal passage.

Step 6

Air dry the Sinus Rinse bottle, cap, and tube on a clean paper towel, a glass plate or use NeilMed´s NasaDock (sold separately) to store the bottle cap and tube. If there is any solution leftover, please discard it. We recommend you make a fresh solution each time you rinse. Rinse once or twice a day, OR as directed by your physician.

Storage :

Information Currently Unavailable

Precautions :

 Information Currently Unavailable

Ingredients :

Sodium Chloride & Sodium Bicarbonate Mixture.

Attachments :

 Information Currently Unavailable